Racing Flag

PARTS INTENDED FOR COMPETITION USE ONLY.
Click for more details.

Racing Flag

PARTS INTENDED FOR COMPETITION USE ONLY.
Click for more details.

BIG-BLOCK SERVICE REPLACEMENT HEADS

12562925

BARE CAST-IRON GEN V AND GEN VI CYLINDER HEAD

  • Bare cast-iron head
  • 118-cc combustion chambers
  • 7/16" accessory bolt holes

12562926

BARE CAST-IRON GEN V AND GEN VI CYLINDER HEAD  

  • Bare cast-iron head
  • Machined for 2.180"/1.880" 3/8" stem valves
  • 118-cc combustion chambers
  • 3/8" accessory bolt holes (otherwise identical to P/N 12562920)

12562920

IRON GEN V AND GEN VI CYLINDER HEAD ASSEMBLY

  • Cast-iron head
  • Completely assembled with 2.180"/1.880" valves
  • 118-cc combustion chambers
  • Uses P/N 12562925 bare casting

Subscribe to receive monthly email communications such as news, offers, and more from Chevrolet Performance.


Visit TheBLOCK.com for a behind-the-scenes look at the world of Chevrolet Performance from an enthusiast's point of view.

Connect


Connect with Chevy Performance.


Subscribe to receive monthly email communications such as news, offers, and more from Chevrolet Performance.


Check out Chevrolet Performance product releases, future car builds, and more.

Connect


Connect with Chevy Performance.

Unless specifically noted to the contrary herein, vehicles equipped with Chevrolet Performance parts that are emissions-related may not meet U.S., Canadian, and state and provincial laws and regulations relating to motor-vehicle emissions. These parts are designed and intended for use in vehicles operated exclusively for competition: in racing or organized competition on courses separate from public streets or highways. Visit www.chevroletperformance.com/emissions for more details.

  • CHEVROLET PERFORMANCE PARTS COMPLIANCE WITH EMISSIONS STANDARDS

    Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. U.S. federal and state and Canadian law prohibits knowingly removing, modifying, or making inoperative, or causing someone to remove or render inoperative, or otherwise tampering with, any part or element of design installed in compliance with motor vehicle emission standards on a motor vehicle or nonroad vehicle, or otherwise modifying any required emission and noise control system. Unless specifically noted to the contrary herein, vehicles equipped with Chevrolet Performance Parts may not meet emissions laws and regulations and should not be operated on public roads or used for any other use. This part is intended primarily for use in vehicles that are NOT:

    (1) “motor vehicles” designed for street use; or

    (2) off-road vehicles used for anything but competition.

    U.S. federal and state, and Canadian provincial agencies have the authority to administer substantial monetary penalties against individuals and companies who do not comply with these laws. Chevrolet Performance customers are responsible for ensuring their use of Chevrolet Performance Parts complies with applicable federal, state/provincial and local laws, regulations and ordinances, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws. In an effort to help consumers maintain compliance with emissions regulations, the product descriptions for many parts include emissions-related warnings and notices. This page summarizes the emissions-related information that you may see on this website.

    PARTS INTENDED FOR COMPETITION USE ONLY

    Chevrolet Performance offers parts that are intended exclusively for use in competition vehicles that will only be driven on a track or off-road course. By “competition vehicles,” GM means vehicles (i) used exclusively for competitions organized and sanctioned by a local or private body and (ii) not designed for use on public streets or highways. Consumers are strongly advised not to install parts accompanied by this warning on vehicles that will be driven on public roads, as they are not designed for that purpose. The product descriptions for such parts are accompanied by the “Checkered Flag” warning icon.

    WARNING: NOT EMISSIONS LEGAL FOR STREET USE

    Because of their effect on a vehicle’s emissions performance, certain parts are intended exclusively for use in competition vehicles. The “Checkered Flag” warning icon means a part is designed and intended for use in vehicles operated exclusively for competition: in racing or organized competition on courses separate from public streets or highways. Installation or use of this part on a vehicle operated on public streets or highways is likely to violate U.S., Canadian, and state and provincial laws and regulations relating to motor vehicle emissions.

|