Racing Flag

PARTS INTENDED FOR COMPETITION USE ONLY.
Click for more details.

Racing Flag

PARTS INTENDED FOR COMPETITION USE ONLY.
Click for more details.

CARBURETORS, THROTTLE BODIES, AND AIR CLEANERS

Chevrolet Performance has the right carburetor or throttle body to complete your new crate engine or give life to your rebuilt engine. All carburetors feature a show-car-quality polished finish and include all necessary bolts and gaskets.

CARBURETORS

19170097

Carburetor – Holley 650-cfm

  • Holley 4150-style 650-cfm 4-bbl carburetor
  • Mechanical secondaries
  • Manual choke
  • Four-corner idle adjustment
  • Power valve blowout protection
  • Replaces Holley 4160 600-cfm carburetor P/N 12497147

19170092

Carburetor – Holley 670-cfm

  • Holley 4150-style 670-cfm 4-bbl carburetor
  • Dual-feed fuel bowls with center-hung floats
  • Vacuum secondaries
  • Electric choke
  • Power valve blowout protection
  • Quick-change adjustable vacuum secondary

19170093

Carburetor – Holley 770-cfm

  • Holley 4150-style 770-cfm 4-bbl carburetor
  • Dual-feed fuel bowls with center-hung floats
  • Vacuum secondaries
  • Automatic electric choke
  • Quick-change adjustable vacuum secondary
  • Recommended for Small-Block and Big-Block engines
  • Replaces Holley 4160 750-cfm carburetor P/N 12485506

Throttle Bodies

17096144

Throttle Body – Ram Jet 350

  • Used on the Ram Jet 350 crate engine
  • Use throttle body gasket P/N 12551240 and bolt P/N 11588714 for installation
  • Single 75-mm blades

AIR CLEANERS

12342071

Air Cleaner – Chevrolet Logo Classic Design

  • 14" round classic-style air cleaner
  • Has chrome lid with embossed Chevrolet name and Bowtie attaching nut
  • Fits most 4-bbl and 2-bbl carburetors
  • Does not fit Dominator-style carburetors

12342080

Air Cleaner – Chevrolet Logo High-Performance Design

  • 14" round high-performance-style air cleaner
  • Has chrome lid with embossed Chevrolet name
  • Fits most 4-bbl and 2-bbl carburetors
  • Does not fit Dominator-style carburetors

NOTE: Check clearance between hood and top of air cleaner. Minimum clearance is 3.750" from top of carburetor gasket area to underside of hood.


19351805

Air Cleaner – Low-Profile Bowtie Chevrolet Design

  • Cast-aluminum flat lid with hidden carb stud mount
  • Flat black with machined logo
  • 14" round high-performance style
  • Fits most 4-bbl and 2-bbl carburetors
  • Matches black slant-edge valve cover P/N 19351534

12498951

Air Cleaner – Ram Jet 350

  • Designed for use with throttle body on Ram Jet 350 crate engine
  • Can be used on other applications

19244451

CLASSIC-STYLE DRESS UP PARTS

  • Deluxe Dress-Up Kits
  • Small Block 262-400 Engines (1959-1986)
  • Get everything you need to give your Small-Block a fresh new look in one package.
  • Any one of the four finishes, with boldly striking CHEVROLET and Bowtie Emblems, offer a distinctive look which is a must have when showing off your Chevrolet Pride!

VISIT OUR BRANDS FOR YOUR OE NEEDS

|

Unless specifically noted to the contrary herein, vehicles equipped with Chevrolet Performance Parts may not meet Federal Motor Vehicle Safety Standards and emissions regulations and should not be operated on public roads. Chevrolet Performance customers are responsible for ensuring their use of Chevrolet Performance complies with applicable federal, state, and local laws, regulations, and ordinances. Many parts intended for racing or other “off-highway” use are not designed or tested for crashworthiness or to meet the safety needs of the motoring public, and may adversely affect the original intended performance or handling characteristics of the vehicle. These parts are designed and intended to be used with experts supervising their installation and use, to help assure the proper and safe operation of the vehicle.

  • CHEVROLET PERFORMANCE PARTS COMPLIANCE WITH EMISSIONS STANDARDS

    Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. U.S. federal and state and Canadian law prohibits knowingly removing, modifying, or making inoperative, or causing someone to remove or render inoperative, or otherwise tampering with, any part or element of design installed in compliance with motor vehicle emission standards on a motor vehicle or nonroad vehicle, or otherwise modifying any required emission and noise control system. Unless specifically noted to the contrary herein, vehicles equipped with Chevrolet Performance Parts may not meet emissions laws and regulations and should not be operated on public roads or used for any other use. This part is intended primarily for use in vehicles that are NOT:

    (1) “motor vehicles” designed for street use; or

    (2) off-road vehicles used for anything but competition.

    U.S. federal and state, and Canadian provincial agencies have the authority to administer substantial monetary penalties against individuals and companies who do not comply with these laws. Chevrolet Performance customers are responsible for ensuring their use of Chevrolet Performance Parts complies with applicable federal, state/provincial and local laws, regulations and ordinances, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws. In an effort to help consumers maintain compliance with emissions regulations, the product descriptions for many parts include emissions-related warnings and notices. This page summarizes the emissions-related information that you may see on this website.

    PARTS INTENDED FOR COMPETITION USE ONLY

    Chevrolet Performance offers parts that are intended exclusively for use in competition vehicles that will only be driven on a track or off-road course. By “competition vehicles,” GM means vehicles (i) used exclusively for competitions organized and sanctioned by a local or private body and (ii) not designed for use on public streets or highways. Consumers are strongly advised not to install parts accompanied by this warning on vehicles that will be driven on public roads, as they are not designed for that purpose. The product descriptions for such parts are accompanied by the “Checkered Flag” warning icon.

    WARNING: NOT EMISSIONS LEGAL FOR STREET USE

    Because of their effect on a vehicle’s emissions performance, certain parts are intended exclusively for use in competition vehicles. The “Checkered Flag” warning icon means a part is designed and intended for use in vehicles operated exclusively for competition: in racing or organized competition on courses separate from public streets or highways. Installation or use of this part on a vehicle operated on public streets or highways is likely to violate U.S., Canadian, and state and provincial laws and regulations relating to motor vehicle emissions.

  • The Manufacturer's Suggested Retail Price excludes tax, shipping and installation. Individual retailer pricing may vary. Please see your local dealer or retailer for details.